FallTech 7092B FlowTech LTE Standard Non-Belted Full Body Harness, 3 D-Rings
- Ships 3-5 Days
- 5.20 LBS
- 8.00 (in)
- 6.00 (in)
- 2.00 (in)
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 3 or above||and get 5% off|
- 3 D-rings, Back and Side
- Quick Connect Legs and Chest
- FlowScape® Shoulder and Leg Pads
- FlowScape® raised D-ring assembly increases air circulation
- FlowScape® breathable molded pad interiors
- Lightweight aluminum hardware
- Ripstop and ballistic nylon pad exteriors
|Webbing||Polyester; Min. 5,000 lbs. tensile strength|
|Dâ€Rings||Alloy Steel; Min. 5,000 lbs. tensile strength|
|Buckles/Adjusters||Aluminum; Min. 3,375 lbs. tensile strength|
|Tensile Strength||Min. 5,000 lbs.|
|Max. Capacity||425 lbs.|
**To maintain ANSI Z359 compliance, limit total user weight to 310lbs
|7092BS||S||3-5 Business Days|
|7092BM||M||3-5 Business Days|
|7092BL||L||3-5 Business Days|
|7092BXL||XL||3-5 Business Days|
OSHA: CFR1926.502, CFR1910.66
ANSI: A10.32â€2004, Z359.1â€2007, Z359.12â€2009
Read, understand and follow all labels and instructions prior to use.
Inspect before each use.
Remove from service if there is evidence of damage or excessive wear.
Never attach a Shock Absorbing Lanyard to front, side, or shoulder Dâ€Rings.