Impacto BG601 Full Finger Anti Vibration Air Glove Liner

Call for Leadtime
0.85 LBS
6.00 (in)
4.00 (in)
1.00 (in)
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 12 or above and get 5% off
  • Impacto BG601 Full Finger Anti Vibration Air Glove Liner. Shop Now!
  • Impacto BG601 Full Finger Anti Vibration Air Glove Liner. Shop Now!
  • Impacto BG601 Full Finger Anti Vibration Air Glove Liner. Shop Now!
MSRP: $147.11
— You save $24.51
Frequently bought together:


IMPACTO® full finger antivibration AirGlove. Worn under any protective glove. Breathable, lint free jersey fabric. Air bladder protection n the palm, fingers and thumb. Leaves no lint for clean work environments. Half finger style for activities that require extra tactile feedback.


  • Helps prevent Hand-Arm Vibration syndrome (HAVS) and White Finger Disease
  • Recommended to be worn inside specialty work glove
  • Full fingers
  • Breathable and stretchy knit fabric
  • Utilizes patented Air Glove technology in the palm, fingers and thumb
  • Helps prevent Hand-Arm Vibration Syndrome (HAVS) and White Finger Disease
  • -00impactoglove.jpgRecommended to be worn inside specialty work gloves

Available Sizes:

BG601-S: Small
BG601-M: Medium
BG601-L: Large
BG601-XL: XLarge
BG601-2XL: 2XLarge

Proper size is important. To determine glove size, measure the hand circumference across the knuckles at the base of the fingers. For gloves with wrist support, use glove sizing. When ordering it is best to order smaller than your normal size.


GE Glove Compliance. Gloves with this symbol are compliant with EN 420:2003 General Requirements for Gloves and EN 388:1994 Protective Gloves against MECHANICAL RISKS. The first number identifies the performance level for abrasion resistance; the second, blade cut resistance; the third, tear resistance and the fourth, puncture resistance


IMPACTO Air Gloves are designed to help reduce injury-causing vibration and the risk of hand-arm vibration symdrome. To pass prEN ISO 10819 certification gloves must have vibration damping material located in the palm area, thumb and fingers past the last joint of the digit. The overall vibration transmissibility for medium frequencies TRM must be less than 1.0 and high range TRH must be less than 0.6. The Air Gloves utilizes Bubble Glove Cellular Air Bladder Technology. Non-permeable polymer bladder with individual air chambers. EN ISO 10819 Test Results are: TRM:0.75, TRH=0.45


**Warranty Policy: All products come with a 6-month warranty against manufacturing defects.


View AllClose

Additional Information

View AllClose