Impacto 501-00 Fingerless Anti Impact Glove Liner

Call for Leadtime
0.85 LBS
1.00 (in)
6.00 (in)
1.00 (in)
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 12 - 17 and get 5% off
Buy 18 - 35 and get 7% off
Buy 36 or above and get 10% off
MSRP: $16.56
— You save $2.76
Frequently bought together:


IMPACTO® Fingerless four-way stretch polycotton lycra glove liner. Visco-elastic polymer (VEP) padding in the palm.


  • Recommended to be worn under work glove
  • Provides impact and vibration protection
  • The 'Original' Impacto-manuactured glove
  • Made of 4-way stretch polycotton Lycra material offering optimum breathability and comfort
  • Contoured VEP 1/8 inches palm padding provides excellent protection from impact and shock
  • Fingerless style leaves fingers free for tactile feedback and mobility
  • Worn underneath work glove to optimize durability

Available Sizes:-00impactoglove.jpg

501-00-XS: XSmall
501-00-S: Small
501-00-M: Medium
501-00-L: Large
501-00-XL: XLarge
501-00-2X: 2XLarge

Proper size is important. To determine glove size, measure the hand circumference across the knuckles at the base of the fingers. For gloves with wrist support, use glove sizing. When ordering it is best to order smaller than your normal size.

001compliance.jpgGE Glove Compliance. Gloves with this symbol are compliant with EN 420:2003 General Requirements for Gloves and EN 388:1994 Protective Gloves against MECHANICAL RISKS. The first number identifies the performance level for abrasion resistance; the second, blade cut resistance; the third, tear resistance and the fourth, puncture resistance


IMPACTO Air Gloves are designed to help reduce injury-causing vibration and the risk of hand-arm vibration symdrome. To pass prEN ISO 10819 certification gloves must have vibration damping material located in the palm area, thumb and fingers past the last joint of the digit. The overall vibration transmissibility for medium frequencies TRM must be less than 1.0 and high range TRH must be less than 0.6. The Air Gloves utilizes Bubble Glove Cellular Air Bladder Technology. Non-permeable polymer bladder with individual air chambers. EN ISO 10819 Test Results are: TRM:0.75, TRH=0.45


**Warranty Policy: All products come with a 6-month warranty against manufacturing defects.


View AllClose

Additional Information

View AllClose