UltraTech 9596 9 Foot Ultra Trackpan System with Covers

Ships 2-3 Days
790.00 LBS
48.00 (in)
42.00 (in)
20.00 (in)
Calculated at Checkout
MSRP: $7,922.74
— You save $3,794.96


Capture Hazardous Spills From Railroad Tanker Cars. Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow. 


  • Prevent costly cleanup and regulatory fines from railcar spills and chemical spills.
  • Modular Design - Center and Side Pans are 53.5" long; railroad spill containment areas can be easily assembled to any length desired
  • All-polyethylene Construction - Rugged Track Pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F
  • Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.
  • Trucks and other vehicles can drive over Track Pans with grates in place (NOTE:  To drive over Track Pans, firm footing must be beneath the Pans; also must "ramp up" to Side Pans with asphalt or concrete)
  • An economical, easy to install railroad spill solution.
  • Modular Track Pan design can be customized to meet your specific railroad spill containment needs.
  • Low Maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. 
  • Low Cost Installation — Lightweight Track Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. 
  • Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. 
  • Long Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.


  • Description: 9-Foot Ultra-TrackPan System w/ Covers (Includes components listed above, plus 4 Side and 2 Center Covers)


  • Meets SPCC and EPA Stormwater Management Regulations. 
  • Also meets New York State Chemical Bulk Storage Regulation Section 599.17c.


**This is an oversize and overweight item. Shipping rates will apply.

View AllClose

Additional Information

View AllClose