FallTech 8097 FlowTech 3D Std Non-belted Full Body Harness
- Ships 3-5 Days
- 2.25 LBS
- 16.00 (in)
- 2.00 (in)
- 36.00 (in)
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 3 or above||and get 5% off|
- 3 D-rings, Back and Shoulder
- Tongue Buckle Legs and Mating Buckle Chest
- FlowScape® Shoulder and Leg Pads
- FlowScape® raised D-ring assembly increases air circulation
- FlowScape® breathable molded pad interiors
- Lightweight aluminum hardware
- Ripstop and ballistic nylon pad exteriors
|Webbing||Polyester; Min. 5,000 lbs. tensile strength|
|Dâ€Rings||Aluminum; Min. 5,000 lbs. tensile strength|
|Buckles/Adjusters||Aluminum and Aloy Steel; Min. 3,375 lbs. tensile strength|
|Tensile Strength||Min. 5,000 lbs.|
|Max. Capacity||425 lbs|
**To maintain ANSI Z359 compliance, limit total user weight to 310lbs
OSHA: CFR1926.502, CFR1910.66
ANSI: Z359.1â€2007, Z359.12â€2009
Read, understand and follow all labels and instructions prior to use.
Inspect before each use.
Remove from service if there is evidence of damage or excessive wear.
Never attach a Shock Absorbing Lanyard to front, side, or shoulder Dâ€Rings.