FallTech 7092FD FlowTech Std Non-belted Full Body Harness
- Ships 3-5 Days
- 4.70 LBS
- 8.00 (in)
- 6.00 (in)
- 2.00 (in)
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 3 or above||and get 5% off|
- 4 Dâ€rings, Back, Side and front
- 4â€point adjustability
- Quick Connect Chest and legs
- FlowScape® Shoulder, and Leg Pads
- 2 lanyard keepers
- Aluminum hardware for lighter weight
|Webbing||Polyester; Min. 5,000 lbs. tensile strength|
|Dâ€Rings||Alloy Steel; Min. 5,000 lbs. tensile strength|
|Buckles/Adjusters||Aluminum; Min. 3,375 lbs. tensile strength|
|Tensile Strength||Min. 5,000 lbs.|
|Max. Capacity||425 lbs.|
**To maintain ANSI Z359 compliance, limit total user weight to 310lbs
|7092SFD||S||3-5 Business Days|
|7092MFD||M||3-5 Business Days|
|7092LFD||L||3-5 Business Days|
|7092XLFD||XL||3-5 Business Days|
OSHA: CFR1926.502, CFR1910.66
ANSI: Z359.1â€2007, Z359.12â€2009
Read, understand and follow all labels and instructions prior to use.
Inspect before each use.
Remove from service if there is evidence of damage or excessive wear.
Never attach a Shock Absorbing Lanyard to front, side, or shoulder Dâ€Rings.