FallTech 8250LTWTA 24" Rebar Positioning Assembly, Alum Rebar Hook, Kevlar Web
- Ships 5-7Business Days
- 3.00 LBS
- 8.00 (in)
- 4.00 (in)
- 4.00 (in)
- Calculated at Checkout
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 10 or above||and get 5% off|
- 2â€1/2" Gate aluminum rebar hook with two aluminum snap hooks.
- Twoâ€layer jacketed web for wear resistance.
- To be used with a Full Body Harness equipped with side Dâ€rings for positioning, or a positioning belt with Side D's
|Web||Polyester â€ min. strength of 9,800 lbs.|
|Connectors||Aluminum; Min.5,000 lbs tensile strength|
|Connector Gates||Steel; Min. 3,600 lbs. front load and side load|
|Tensile Strength||Min. 5,000 lbs.|
|Max. Capacity||425 lbs|
**To maintain ANSI Z359 compliance, limit user weight to 310lbs.
OSHA: CFR1926.502, CFR1910.66
ANSI: Z359.1â€2007, A10.32â€2004
Read, understand and follow all labels and instructions prior to use.
Inspect before each use.
Remove from service if there is evidence of damage or excessive wear.
Maximum freefall is 2 feet
Must be used with backâ€up fall arrest